MAXIMA ULTRA 36 INOX 230V

Refence P940093 00202 Part number 2605378
Professional electromechanical barriers

230 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with spring. Stainless steel barrier body.

Go to manuals Declaration of conformity
Professional electromechanical barriers

Technical data sheets

technical design
Protection rating IP55
Impact reaction encoder
Motor type Three-phase asynchronous
Interconnectivity no
Locking Mechanical
Motor power supply 230 V
Release Inside the structure
Processing type AISI 304 stainless steel
Frequency of use Continuous
Internal lubrication In oil bath
Opening time (depending on the width of the leaf) from 0.7 to 3.9 s
MCBF (Mean Cycles Between Failures) 7000000 Op
Inverter Yes
Clear opening from 2.0 to 6.0 m
Environmental conditions -40 ÷ 60 °C
Slowdown Yes
Control unit CSB Xtreme
Go to manuals

Commercial documents

BARRIERS
Complete range road barriers
Show

Video

Maxima Ultra 36
Maxima ultra 36
Show

Recommend accessories

Crown MAXIMA U36
P940095 00000

Cap without lights for Maxima Ultra 36.

Crown RGB MAXIMA U36
P940095 00003

Cap with RGB lights for Maxima Ultra 36. Functions: flashing, traffic light, diagnostics.

Crown RGB MAXIMA U36 RAL
P940095 00103

Cap with RGB lights for Maxima Ultra 36. Custom RAL. Functions: flashing, traffic light, diagnostics.

Crown RGB MAXIMA U36 INOX
P940095 00203

Cap with RGB lights for Maxima Ultra 36 Stainless Steel. Functions: flashing, traffic light, diagnostics.

DIMA PRO36 UL
P120088 00001

Foundation template and clamps for installation of Maxima Ultra 36 barriers.

BOOM PS30
P120087 00001

Aluminium bar, opening L = 3 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS40
P120087 00002

Aluminium bar, opening L = 4 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS50
P120087 00003

Aluminium bar, opening L = 5 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS60
P120087 00004

Aluminium bar, opening L = 6 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

OMEGA PS MAXIMA U36
P120084 00000

Single lock for protective finger trapping casing and screws for MAXIMA ULTRA 36. BOOM PS bar excluded.

OMEGA FRA PS MAXIMA U36
P120094 00000

Resettable impact protection connector (manual) for Maxima Ultra 36 barrier. BOOM PS bar excluded.

LIGHT PS/ES 30-IP67
P120089 20001

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 3 metres long. Power supply unit excluded.

LIGHT PS/ES 40-IP67
P120089 20002

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 4 metres long. Power supply unit excluded.

LIGHT PS/ES 50-IP67
P120089 20003

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 5 metres long. Power supply unit excluded.

LIGHT PS/ES 60-IP67
P120089 20004

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 6 metres long. Power supply unit excluded.

ALLU 2 MAXIMA ULTRA
P120075

Power supply for ATM LIGHT Kit on Maxima Ultra

HYPHEN PS
P120091

Internal reinforcement/joint for BOOM PS booms. Already included in the Maxima Ultra 36 XL barriers but recommended for barriers L >= 5 m with or without accessories.

Internal reinforcement/joint for BOOM PS booms. Already included in the Maxima Ultra 36 XL barriers but recommended for barriers L >= 5 m...

HYPHEN PS PRO
P120108

Internal reinforcement for BOOM PS booms L=175 cm. Increases the rigidity of the bar. Recommended for use in particularly windy areas.

BTM-SKIRT
P120085

Lower skirt for BOOM PS booms. Module length L = 2 m.

FULL-SKIRT
P120086

Full skirt (top and bottom) for BOOM PS booms. Module length L = 2 m. Does not include SKIRT BRACKET required for anchoring the first module to the barrier body.

Full skirt (top and bottom) for BOOM PS booms. Module length L = 2 m. Does not include SKIRT BRACKET required for anchoring the first module...

BRACKET SKIRT
P120095

Connection bracket between barrier body and simple (BTM SKIRT) or double (FULL SKIRT) aluminium rack.

ADJ-FOOT
P120093

Suspended cushioned telescopic supporting foot for BOOM PS booms.

ART90 BOOM PS30 R/G
P120092 00002

Boom bar PS L = 5 m 90° articulated including bar and LIGHT PS lighting pre-fitted.

ART90 BOOM PS50 R/G
P120092 00004

Boom bar PS L = 5 m 90° articulated including bar and LIGHT PS lighting pre-fitted.

FAF UNI R
P120080

Universal adjustable fork for all rods; recommended with installation of FULL SKIRT accessory.

MITTO COOL C2
D112306

2-Channel transmitter. 50/100 m range. 3V power supply with 1 CR2032 type battery. Blue.

MITTO COOL C4
D112318

4-Channel transmitter. 50/100 m range. 3V power supply with 1 CR2032 type battery. Blue.

Do you need more information?

Please contact us and a member of our support team will reply as soon as possible.

Write to us