EBP AC A 230V 50/60HZ
Product code P123032 00001 International code 2613516
Main features
Higher protection for the installation: the electric lock makes it possible to create installations that better withstand the forces applied to the leaves in swinging gates, especially large ones, such as pushes from people or forces generated by the action of the wind. These forces are transferred to the electromechanical lock instead of the gear motor, providing a longer life and better operation over time
Offer completion for reversible operators: the electric lock is an essential accessory for installations involving the use of reversible operators, in order to provide locking for the gate when closing
Range extension: the new EBP A model in 24V, which is directly connected to the control unit, allows safe low-voltage swing gate installations to be completed easily and quickly
Range optimisation: there will no longer be any specific electric lock models (EBPE) with an external (road side) key block. In all models of the new EBP A it is possible at any time to add the external key block, which is available in two sizes of 52 or 75 mm. The accessory also includes the inside key block, which has the same key as the outside key block, and which should be replaced with the one on the electric lock by the installer
Outward opening: the EBP A electric lock can be installed either on swing gates that open inwards or on gates that open outwards (the plate with the ground hole must be installed in the correct direction)
Simplicity of a single key for the entire system: it is possible to request the new EBP A with a specific internal key block, or request accessories with internal and external blocks with a specific key number, so that the same key can be used to unlock the operator, operate the selector switch and release the electric lock
Design: the look of the product has been updated - in line with Bft's modern style - allowing it to be perfectly integrated into the installation environment
Technical data sheets
| Power supply | 220-230V 50/60 Hz |
| Inrush current | 1.2 A |
| Holding current for the retracted bolt | 200 mA |
| Thermal protection | Yes |
| Operating temperature | -20 ÷ 55 °C |
| IP Rating | IP44 |
| Interconnectivity | no |
Commercial documents
Recommend accessories
CSE 52 (EXTERNAL RELEASE EBP 52 MM)
P123033
CSE 75 (EXTERNAL RELEASE EBP 75 MM)
P123034
Do you need more information?
Please contact us and a member of our support team will reply as soon as possible.