PHOBOS AC A

Pistons and kit for automatic swing gates for residential use

catalog (PDF)

Pistons and kit for automatic swing gates for residential use

Complete range of electro-mechanical pistons for residential use, suitable for swing gates up to 5 metres in length and up to 500 kg in weight. Simplified and intuitive wiring: the new ALENA control units allow slowdowns, are equipped with standardised and coloured terminal blocks for the simple connection of operators and accessories.

Pistons and kit for automatic swing gates for residential use

Technologies

Rolling Code

For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

ER - READY

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

EE LINK

For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.

Products list

  • Phase Out

Irreversible electromechanical operator 230 V for swing gates weighing up to 400 kg and 2,5 m long.

  • Phase Out

Irreversible electromechanical operator 120 V for swing gates weighing up to 400 kg and 2,5 m long. work time limit switch

  • Phase Out

Irreversible electromechanical operator 230 V for swing gates weighing up to 500 kg and 5 m long.

  • Phase Out

Irreversible electromechanical operator 120 V for swing gates weighing up to 500 kg and 5 m long.

Kit

  • Phase Out

Complete kit 230 V for swing gates up to 400 kg in weight and 2,5 m in length.

  • Phase Out

Complete kit 230 V for swing gates up to 500 kg in weight and 5 m in length.

Accessories

MITTO COOL C4
D112318

4-Channel transmitter. 50/100 m range. 3V power supply with 1 CR2032 type battery. Blue.

MITTO COOL C2
D112306

2-Channel transmitter. 50/100 m range. 3V power supply with 1 CR2032 type battery. Blue.

ALENA SW2
D113811 00004

Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operators power supply: 230V single-phase 400W max each operator Main features: programming of trimmer and dip-switch, removable terminal block with standard colouring, integrated radio receiver, remote controlled pedestrian opening. Soft opening and closing (only with electromechanical motor), management of resistive safety edges 8K2/contact, management of verified safety devices, management of electronic locks, electronic control of motor torque (only with electromechanical motor), pressure surge when opening. Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics Compatibility: ALTAIR and ARIES

Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operators power supply: 230V...

ALENA SW2 120V
D113811 00003

Control panel with dip switches and potentiometers for one or two 120V 400W+400W, operators for swing gates and industrial folding doors Application: control panel for one or two operators for swing gates Board power supply: 120V single-phase Operator power supply: 230 V single-phase, max. 400W per operator Main features: programming of trimmer and dip-switch, removable terminal block with standard colouring, integrated radio receiver, remote controlled pedestrian opening. Soft opening and closing (only with electromechanical motor), management of resistive safety edges 8K2/contact, management of verified safety devices, management of electronic locks, electronic control of motor torque (only with electromechanical motor), pressure surge when opening. Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics Compatibility: ALTAIR and ARIES

Control panel with dip switches and potentiometers for one or two 120V 400W+400W, operators for swing gates and industrial folding doors...

ARB PHOBOS 25
N733427 00001

Adjustable front mounting bracket, Phobos A 25

ARB PHOBOS 40
N733428 00001

Adjustable front mounting bracket, Phobos A 40

SFR B
N735002

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7)

SFR-L B
N735003

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7)

SFR B - COMPLETE
N735002 00001

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

SFR-L B - COMPLETE
N735003 00001

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

PLE
D730178

Anchor plate for attaching the rear mountings to masonry pillars for LUX, ORO, and PHOBOS operators.

RADIUS LED AC A R1
D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

AMIP
N998613

PHOBOS built-in mechanical stops.

EBP AC A 230V 50/60HZ
P123032 00001

230V vertical electric lock.

EBP AC A 120V 50/60Hz
P123032 00002

120V vertical electric lock.

MITTO STYLE C4
D112307

4-Channel transmitter. 50/100 m range. 3V power supply with 1 CR2032 type battery. Black with chrome keyring loop.