GIOTTO BT B ULTRA 36

catalog (PDF)

Range of 24V electromechanical barriers with adjustable opening speed for traffic control management. Ideal for installation in large car parks, vehicle access points and industrial gates. Compatible with ES and PS booms. Balancing spring kit to be purchased separately, according to requirements. Cap light diffuser to be purchased separately. High degree of movement control and impact resistance via encoder. Integrated control unit with U-Link connectivity. ULTRA aesthetics similar to the Maxima Ultra 36. Wide range of accessories for any type of application.

Main features

Fast, reliable and safe: Can be installed in access points from 2 to 6 metres wide. Adjustable opening speed from 2.2 to 4 seconds. Encoder guarantees reverse motion if an obstacle is detected. Tested for three million cycles.

Flexible configuration: Only one version of barrier to be combined with the spring kit best suited to your needs. All parts of the spring kit are already pre-assembled. Quick and easy assembly.

Visible in any environment: light ring with high-intensity LEDs, visual match with the bar lights, matches cap supplied with barrier. Red/green LEDs with traffic light function. Quick and easy to install, even on already installed barriers, without any additional work.

Full accessories: Installation of lights and protective rubber strips along entire length of the ES and PS bars, up to six metres, for industrial applications.

Maximum accessibility of control board: The control board is positioned directly below the barrier cap. All installation and maintenance work can be carried out safely, with the casing closed. Built-in radio receiver.

Products list

  • News

GIOTTO BT B ULTRA36 120V

More

Barrier with 24 V motor for opening from 2 to 6 metres and opening time from 2.2 to 4 s. 110-120V power supply. Balancing spring kit to be purchased separately. Reaction to impact via Encoder. Colour grey, RAL 7015. Integrated control unit with U-Link connectivity.

  • News

GIOTTO BT B ULTRA36 120V RAL

More

Barrier with 24 V motor for opening from 2 to 6 metres and opening time from 2.2 to 4 s. 110-120V power supply. Balancing spring kit to be purchased separately. Reaction to impact via Encoder. Colour grey, special RAL. Integrated control unit with U-Link connectivity.

  • News

GIOTTO BT B ULTRA36 230V

More

Barrier with 24 V motor for opening from 2 to 6 metres and opening time from 2.2 to 4 s. 220-230V power supply. Balancing spring kit to be purchased separately. Reaction to impact via Encoder. Colour grey, RAL 7015. Integrated control unit with U-Link connectivity.

  • News

GIOTTO BT B ULTRA36 230V RAL

More

Barrier with 24 V motor for opening from 2 to 6 metres and opening time from 2.2 to 4 s. 220-230V power supply. Balancing spring kit to be purchased separately. Reaction to impact via Encoder. Colour grey, special RAL. Integrated control unit with U-Link connectivity.

Accessories

BOOM ES30
P120104 00001

Aluminium bar for 3 m wide openings. Rubber strips and lights not included.

BOOM ES40
P120104 00002

Aluminium bar for 4 m wide openings. Rubber strips and lights not included.

BOOM ES50
P120104 00003

Aluminium bar for 5 m wide openings. Rubber strips and lights not included.

BOOM ES60
P120104 00004

Aluminium bar for 6 m wide openings. Rubber strips and lights not included.

PCA ES N3
P120117 00001

Lower and upper protective rubber strip kit for 3 m BOOM ES. Blanking plugs and fastening clips for lights included.

PCA ES N4
P120117 00002

Lower and upper protective rubber strip kit for 4 m BOOM ES. Blanking plugs and fastening clips for lights included.

PCA ES N5
P120117 00003

Lower and upper protective rubber strip kit for 5 m BOOM ES. Blanking plugs and fastening clips for lights included.

PCA ES N6
P120117 00004

Lower and upper protective rubber strip kit for 6 m BOOM ES. Blanking plugs and fastening clips for lights included.

OMEGA ES
P120103

Barrier clamp, casing for hand protection and screws for BOOM ES on Giotto Ultra 36. Barrier not included.

TOP LIGHT GU36
P120125

Light ring to be placed under the barrier cap. Includes red/green LED lights and fixing brackets. Barrier cap not included.

KIT ML65-L
P120126

Balancing spring kit for bar length up to 4 metres.

KIT ML81-H
P120127

Balancing spring kit for bar length up to 6 metres.

LIGHT PS/ES 30-IP67
P120089 20001

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 3 metres long. Power supply unit excluded.

LIGHT PS/ES 40-IP67
P120089 20002

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 4 metres long. Power supply unit excluded.

LIGHT PS/ES 50-IP67
P120089 20003

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 5 metres long. Power supply unit excluded.

LIGHT PS/ES 60-IP67
P120089 20004

High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 6 metres long. Power supply unit excluded.

GT BOARD
P120116

Power supply unit for LIGHT PS/ES lights for Giotto Ultra 36

ART90 PS GIOTTO ULTRA36 KIT
P120122

Hinge accessories kit for PS 90° articulated bar on Giotto Ultra 36. Excludes tie rod, bar, bar connector and PS lights. Compatible with PS BOOMS

Hinge accessories kit for PS 90° articulated bar on Giotto Ultra 36. Excludes tie rod, bar, bar connector and PS lights. Compatible with PS...

TIE ROD FOR ART90 PS KIT
P120121

Tie rod to be combined with the hinge accessories kit for PS 90° articulated bar. Compatible with ART 90 PS MAXIMA ULTRA KIT 36 and ART 90 GIOTTO ULTRA 36 KIT

Tie rod to be combined with the hinge accessories kit for PS 90° articulated bar. Compatible with ART 90 PS MAXIMA ULTRA KIT 36 and ART 90...

BOOM PS30
P120087 00001

Aluminium bar, opening L = 3 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS40
P120087 00002

Aluminium bar, opening L = 4 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS50
P120087 00003

Aluminium bar, opening L = 5 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS60
P120087 00004

Aluminium bar, opening L = 6 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

OMEGA PS GIOTTO ULTRA 36
P120100

Barrier clamp, casing for hand protection and screws for BOOM PS on Giotto Ultra 36. Barrier not included.

BTM-SKIRT
P120085

Lower skirt for BOOM PS booms. Module length L = 2 m.

BRACKET SKIRT
P120095

Connection bracket between barrier body and simple (BTM SKIRT) or double (FULL SKIRT) aluminium rack.

ADJ-FOOT
P120093

Suspended cushioned telescopic supporting foot for BOOM PS booms.

GIOTTO M BG BAT KIT
P120074

Buffer battery kit for Giotto BT A series barrier

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

RME 1 BT
P111274

24 V single channel metal object detector with installation base

BMC A
P903031

Support for mounting COMPACTA series photocells on wall and on Giotto, Moovi and Michelangelo barriers

CBO
D730251

Anchor base for MOOVI and GIOTTO series barriers

CBO PRO
P120128

Foundation template and clamps for installation of Giotto Ultra 36 barriers/Moovi AC.

FAF UNI R
P120080

Universal adjustable fork for all rods; recommended with installation of FULL SKIRT accessory.

LOOP DETECTOR PRO 230V
P111786

Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level, boost function for increasing sensitivity, direction of travel management

Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level,...

RME 2
P111001 00003

230 V dual channel metal object detector with installation base

FAF 2
P120023

Rest fork for booms. For bolting to ground.

FAF 2 RAL
P120023 00100

Fixed rest fork for booms with customised RAL colour. For bolting to ground.

ZFAF2
P120026

Additional anchor plates for cementing FAF2 forks to ground.

SPIRA 2X1
D110926 00001

Magnetic loop 2 x 1 m

MITTO COOL C2
D112306

2-Channel transmitter. 50/100 m range. 3V power supply with 1 CR2032 type battery. Blue.

MITTO COOL C4
D112318

4-Channel transmitter. 50/100 m range. 3V power supply with 1 CR2032 type battery. Blue.