MITTO

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices

catalog (PDF)

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices

Complete range of remote controls, 433MHz rolling code. Available with 2 or 4 channels.

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices

Technologies

Rolling Code

For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

ER - READY

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

EE LINK

For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.

Products list

  • News

Transmitters with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Pack of 100 items, numbered for block memory. Buttons panel can be customised with own design/logo.

  • News

Transmitters with 2 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Pack of 100 items, numbered for block memory. Buttons panel can be customised with own design/logo.

  • Phase Out

Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour clear ice white. Buttons panel can be customised with own design/logo.

  • Phase Out

Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour clear ice white. Buttons panel can be customised with own design/logo. Minimum quantity 100 items.

  • Phase Out

Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: sunrise yellow

  • Phase Out

Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour sunrise yellow. Buttons panel can be customised with own design/logo. Minimum quantity 100 items.

  • Phase Out

Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: vineyard red

  • Phase Out

Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour vineyard red. Buttons panel can be customised with own design/logo. Minimum quantity 100 items.

  • Phase Out

Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Pack of 100pcs numbered for block memorisation.

  • Phase Out

Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Pack of 100pcs numbered for block memorisation.

  • Phase Out

Copyable transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

  • Phase Out

Pairable transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Buttons panel can be customised with own design/logo. Minimum quantity 100 items.

  • Phase Out

Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

  • Phase Out

Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Buttons panel can be customised with own design/logo. Minimum quantity 100 items.

  • Phase Out

Transmitter 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Pack of 100pcs numbered for block memorisation.

  • Phase Out

Transmitter 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Pack of 100pcs numbered for block memorisation.

  • Phase Out

Copyable transmitter 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

  • Phase Out

Pairable transmitter with 2 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Buttons panel can be customised with own design/logo. Minimum quantity 100 items.

  • Phase Out

Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

  • Phase Out

Transmitter with 2 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Buttons panel can be customised with own design/logo. Minimum quantity 100 items.

  • Phase Out

Pack of four MITTO 4 transmitters in the four BFT colours: vineyard red sunrise yellow clear ice white deep sea blue

Accessories

CLONIX 2E AC U-LINK 230
D113807 00002

433 MHz external receiver, compatible with U-LINK protocol (features 3 connection ports). 230 V Power supply, can store up to 2,048 remote controls

433 MHz external receiver, compatible with U-LINK protocol (features 3 connection ports). 230 V Power supply, can store up to 2,048 remote...

CLONIX UNI AC U-LINK 230V
D113808 00003

433 MHz external receiver via 3 outputs: 2 with NO contact and one with configurable NO/NC contact. Compatible with U-LINK protocol (features 3 connection ports). Power supply, 230 V, can store up to 2,048 remote controls

433 MHz external receiver via 3 outputs: 2 with NO contact and one with configurable NO/NC contact. Compatible with U-LINK protocol...

CLONIX 2E
D113674 00001

External two-channel 433 MHz rolling code receiver. 128 position memory. 24 Vpower supply.

CLONIX 4 RTE
D113718 00002

External 4-channel 433 MHz rolling code receiver. 230 V power supply.

U-BASE
P111510

Software for bluetooth programming and managing of control unit, receiver and transmitters. USB key included

U-PROG
P111529

Programmer for radio control units and receivers with possibility of wired or BlueTooth connection

CLIP B 00 R04
N999522

Wall mounting clip for KLEIO B RCA and MITTO B RCB remote controls. 30 unit pack

CLIP1 B 00 R03
N999521

Clip for hooking KLEIO B RCA and MITTO B RCB series remote controls to belt or sun visor. Supplied in pack of 30pcs