PILLAR B 275/800.10C LI SD STAINLESS STEEL 316

Refence P970106 00304 Part number 2612951
Hydraulic retractable bollard with security system for power outages

230 V hydraulic bollard, shaft height 800 mm and diameter 273 mm. LED light cap and H adhesive strip: 100 mm, certified. In the event of a power cut, the bollard remains raised. Foundation box included.

Go to manuals Declaration of conformity
Hydraulic retractable bollard with security system for power outages

Technologies

Easily accessed hydraulic pump

This solution, included in the range of Bft hydraulic bollards, allows quick maintenance without the use of a shaft lifting crane.

Technical data sheets

technical design
Rod treatment AISI 316L stainless steel
Control unit PERSEO CBE
Power supply 230 V
Rod height 800 mm
Rod thickness 10 mm
Rod diameter 273 mm
Type of limit switch REED magnetic sensor
Impact resistance 20000 J
Break-in proof 667000 J
Manual cycle Release key
Frequency of use 3000 Op/gg
Protection rating IP67
Environmental conditions -40 ÷ 60 °C
Interconnectivity no
Raise time 6.8 s
Lower time 4.1 s
Antiterrorism: reference standard PAS 68:2010 7500/50/N2
Go to manuals

Recommend accessories

MITTO COOL C2
D112306

2-Channel transmitter. 50/100 m range. 3V power supply with 1 CR2032 type battery. Blue.

LOOP DETECTOR PRO 230V
P111786

Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level, boost function for increasing sensitivity, direction of travel management

Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level,...

SPC3
D121619

Open stop close button panel.

MITTO COOL C4
D112318

4-Channel transmitter. 50/100 m range. 3V power supply with 1 CR2032 type battery. Blue.

BOLLARD CABLE EXT25
P800114

Extra charge for 25 m cable for bollards (to be added to the 10 included into bollards)

PILLAR ALARM
P800102

Magnetic anti-theft kit for PILLAR B hydraulic bollards. To be requested when ordering

ACOUSTIC DETECTOR
D113705

Adjustable acoustic detector for sirens

RME 2
P111001 00003

230 V dual channel metal object detector with installation base

SPIRA 2X1
D110926 00001

Magnetic loop 2 x 1 m

MANUAL PUMP 2LT
P800111

2 litre manual pump

TAP FOR MANUAL PUMP
P800112

Joint for two-litre manual pump.

BOLLARD CABLE EXT50
P800115

Extra charge for 50 m cable for bollards (to be added to the 10 included into bollards)

Do you need more information?

Please contact us and a member of our support team will reply as soon as possible.

Write to us