REEL EASY B30 230V W45

Refence P910052 00003 Part number 2254496
Motors and kit for the automation of roller shutters

Wired operator for roller shutters. Max shutter weight 55 kg. max torque 30 Nm and power input 235 W. Shaft rotation speed 16 Rpm

Go to manuals Declaration of conformity
Motors and kit for the automation of roller shutters

Main features

The KIT version comes complete with all accessories for proper installation as well as operators already arranged in the special telescopic roller, able to adapt perfectly the size of the frame with a single action

New Shedir compact wire centralisation board: easily installed even in the boxes of roller shutters thanks to its small size, it can control up to two motors or motor units in single or centralised mode.

Technical data sheets

technical design
Motor power supply 230 V
Power consumption 235 W
Outer diameter 60 mm
N° limit switch revolutions 28
Type of end switch Mechanical
Locking Mechanical
Frequency of use Residential
Protection rating IP44
Environmental conditions -10 ÷ 40 °C
Interconnectivity no
Go to manuals

Recommend accessories

CAL 60/100
P130002

Adjustable telescopic octagonal cover for RUL 60.

SM5014
N999325

Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm).

RUL 60/3
P130012

Octagonal shutter winding roller Ø60 mm x 3 m.

MITTO COOL C4
D112318

4-Channel transmitter. 50/100 m range. 3V power supply with 1 CR2032 type battery. Blue.

MITTO COOL C2
D112306

2-Channel transmitter. 50/100 m range. 3V power supply with 1 CR2032 type battery. Blue.

SHEDIR B CBC 02 L01
P111515

Control unit for wired centralisation. For 2 operators (or 2 groups of operators) Application: wire centralisation board for 1 or 2 tubular motors Card power supply: 230 V single-phase Operator power supply: 230V 600W max. each operator Main characteristics: simplified and compact wire centralisation system Functions: control of 1 or 2 motors (or motor units) in single or simultaneous mode, general up/down, motor 1 or unit 1 up/down, motor 2 or unit 2 up/down

Control unit for wired centralisation. For 2 operators (or 2 groups of operators) Application: wire centralisation board for 1 or 2 tubular...

MIME PAD
P121028

4-channel wall-mounted radio control with rolling code

MIME TX
D113831

Two-channel miniaturized 433 Mhz transmitter

SCS 1
P111376

Serial board for connection to zone and opposing leaves for control units with display While stocks last

CREP
P111183

Twilight sensor

ANEM
P111182

Anemometric ​​sensor with encoder for wind

BLOCCANTI 40
P130001

Anti-break-in block for shutters with slats of height 40 mm.

BLOCCANTI 50
P130013

Anti-break-in block for shutters with slats of height 50 mm.

MIME AC
D113824

433 MHz two-channel indoor receiver 2 independent outputs 230 Vac power supply 30-position memory Operating mode: monostable, bistable, timed, motor control

433 MHz two-channel indoor receiver 2 independent outputs 230 Vac power supply 30-position memory Operating mode: monostable, bistable,...

Do you need more information?

Please contact us and a member of our support team will reply as soon as possible.

Write to us