THALIA BT A
Control panel with display for one or two 24V electromechanical operators used on 230V swing gates. There are two power modules, which are interchangeable and can operate all motors. The radio receiver is incorporated and the memory of the remote controls is removable and expandable. It has an anti-crushing system based on D-Track technology, it controls the slowing down when opening and closing and has an electronic self-learning function. The main functions include automatic closing, fast closing, partial opening and hold-to-run operation. This panel can be programmed using Bluetooth or remotely via wifi/GSM using a dedicated app. The product complies with the new energy efficiency regulations and therefore has a power consumption on standby of less than 0.5 W.
Põhiomadused
Modular: with the additional modules you can offer more installation options to meet the requirements of a wider range of customers. The new smart board can, if necessary, provide greater electrical power for operating larger motors or motors which operate in demanding conditions
Connectible: with the dual connector, you can connect a gateway and leave it permanently connected, using the second slot for harnessing the full potential of the B-EBA family of cards
Advanced: the U-LINK communication protocol is technologically advanced and can now communicate with the cloud and modern data communications technologies. It is very fast and reactive, meaning it can communicate data bi-directionally and it supports OTA technology which means that firmware updates can be scheduled remotely
Portable: the memory capacity for remote controls has been expanded from 64 to 128 positions but, if needed, the 2,048-position module can be selected for managing installations with a large number of stored remote controls. The memory can be removed and inserted into a new motherboard without losing any remote controls or the stored list of parameters and logic
Spacious: the box housing the electronics is completely new. There is more room for maintenance, wiring is quicker and easier with the new system with seals, the battery pack for emergency operation can be fitted into the box and the wall mounting system has been revised and simplified
94% less power consumption in standby mode, resulting in 69.82 kWh saved annually. Energy consumption of accessories connected to the board is not counted.
Tehnoloogiad
Evoluzione del protocollo di comunicazione U-link, U-link 2.0 mantiene una robusta protezione dei dati, l’approccio aperto che le consente di adattarsi a diversi linguaggi di comunicazione e la sua scalabilità che non pone limiti al collegamento di oggetti (B-eba) al network. Al tempo stesso evolve consentendo di inviare ma anche ricevere informazioni dalla centrale realizzando una comunicazione bi-direzionale. Supporta inoltre la tecnologia OTA che consente di aggiornare da remoto il firmware. Grazie a questo nuovo protocollo, più performante, sarà possibile programmare la centrale usando una specifica app e gestire anche molte informazioni sia in modalità locale (bluetooth) che da remoto (wifi / GSM), migliorando l’esperienza d’uso.
EasyAXS is the new connectivity solution which boosts the potential of BFT products and services to make access automations smarter and easier to use for both installers and end users. BFT solutions are a great step forward for the access sector. Installers and end users can enjoy from connectivity benefits through the reliable, secure and convenient system.
Täpne, ohutu ja usaldusväärne Bft 24V tehnoloogia tagab sulgumisel ja avanemisel optimaalse jõudluse koos aeglustuse täpse korrigeerimisega. Teine oluline aspekt on ohutus, mille tagab takistuse tekkimisel viivitamatu peatumine ja liikumine vastassuunas. Tehnoloogia tõhusus garanteerib toote usaldusväärsuse.
Ohutuks kasutuseks vajalik tõukejõud. BFT juhtseadme mikroprotsessori tehnoloogial põhinev nutika pöördemomendiga juhtimissüsteem. Hankides teavet mitme indikaatoriga, uuendab seade ülesande sooritamiseks vajaliku tõukejõu taset. D-Track lihtsustab ka paigaldamist, sisaldades seadusega ettenähtud sertifikaate. Tavapärased juhtsüsteemid ei oska "lugeda" värava õiget asukohta ja seetõttu kohaldatakse pidevalt tõukejõu taset, ilma tagamata stabiilset tundlikkust avamisel ja sulgemisel. BFT juhtseade salvestab väikseimagi erinevuse värava või ukse jõu juures, nt. muutuse temperatuuris või kulumise, varustades mootorit optimaalse pöördemomendiga. Tavapärane juhtsüsteem ei suuda tabada neid tõukejõu erinevusi, mille tõttu viitab seade olematule takistusele. Seetõttu garanteerib BFT süsteem maksimaalse ohutuse ja ideaalselt töötava seadme, sõltumata kliima- ja temperatuuritingimustest ning mehaanilisest kulumisest.
U-Security is a new technology from BFT which, in addition to incorporating a new encrypted rolling code transmission, also incorporates the functionalities of the Er-Ready system and introduces a new procedure for programming BFT remote controls by scanning a QR code. The new rolling code system has an encryption key which masks the code and prevents the BFT remote controls from being cloned by third-party models. All products which have this technology integrate the coding system to directly clone remote controls (Er-Ready) and are therefore all REPLAY. In addition, with U-Security it is also possible to add remote controls to a BFT receiver and program them using the QR code which is printed on the cover of each Mitto C, using the dedicated app.
Toodete loetelu
Tarvikud
EBD
P111821
