ZARA BT A
Control panel with dip switch and potentiometers for one or two operators in 24V used in 230V swing gates. The radio receiver is built-in and the memory of the remote controls can be extracted and expanded. It has an anti-crushing system based on D-Track technology, manages automatic reclosing, quick closing, partial opening. This panel can be programmed via Bluetooth or remotely via wifi/GSM thanks to a specific app. The product complies with the new low power consumption regulations and therefore has a stand-by consumption of less than 0.5W.
Основные функции
Modular: with the additional modules you can offer more installation options to meet the requirements of a wider range of customers. The new smart board can, if necessary, provide greater electrical power for operating larger motors or motors which operate in demanding conditions
Connectible: with the U-LINK connector, now also available on the T&D board, you can program the unit using a dedicated app and can also do so remotely if using a wifi/GSM gateway.
Advanced: the U-LINK communication protocol is technologically advanced and can now communicate with the cloud and modern data communications technologies. It is very fast and reactive, meaning it can communicate data bi-directionally and it supports OTA technology which means that firmware updates can be scheduled remotely
Portable: the memory capacity for remote controls has been expanded from 64 to 128 positions but, if needed, the 2,048-position module can be selected for managing installations with a large number of stored remote controls. The memory can be removed and inserted into a new motherboard without losing any remote controls or the stored list of parameters and logic
Spacious: the box housing the electronics is completely new. There is more room for maintenance and the wall mounting system has been revised and simplified.
94% less power consumption in standby mode, resulting in 69.82 kWh saved annually. Energy consumption of accessories connected to the board is not counted.
Технологии
Evoluzione del protocollo di comunicazione U-link, U-link 2.0 mantiene una robusta protezione dei dati, l’approccio aperto che le consente di adattarsi a diversi linguaggi di comunicazione e la sua scalabilità che non pone limiti al collegamento di oggetti (B-eba) al network. Al tempo stesso evolve consentendo di inviare ma anche ricevere informazioni dalla centrale realizzando una comunicazione bi-direzionale. Supporta inoltre la tecnologia OTA che consente di aggiornare da remoto il firmware. Grazie a questo nuovo protocollo, più performante, sarà possibile programmare la centrale usando una specifica app e gestire anche molte informazioni sia in modalità locale (bluetooth) che da remoto (wifi / GSM), migliorando l’esperienza d’uso.
EasyAXS is the new connectivity solution which boosts the potential of BFT products and services to make access automations smarter and easier to use for both installers and end users. BFT solutions are a great step forward for the access sector. Installers and end users can enjoy from connectivity benefits through the reliable, secure and convenient system.
Точная, безопасная и надежная технология Технология 24V компании Bft обеспечивает оптимальную производительность с точной регулировкой замедления при закрытии и открытии. Безопасность является еще одним ее ключевым аспектом за счет обеспечения остановки и немедленной смены направления движения в присутствии препятствий. Эффективность технологии является гарантией надежности изделия.
Необходимое усилие для безопасной эксплуатации. Эта интеллектуальная система управления крутящим моментом основывается на микропроцессорной технологии блоков управления Bft. Получая данные от нескольких датчиков, она корректирует тяговое усилие, необходимое для выполнения маневра. D-Track также упрощает получение установщиком требуемых по закону сертификатов. Традиционные блоки управления не "считывают" точное местоположение ворот и, следовательно, работают с постоянным тяговым усилием, не обеспечивая стабильную во времени чувствительность в процессе маневров открытия и закрытия. В то время как устройства Bft отмечают даже самые малые вариации усилия ворот или дверей, связанные, например, с перепадами температур или износом, постоянно обеспечивая двигателю оптимальный крутящий момент. Обычный блок управления не смог бы определить необходимое изменение усилия, а просто подал бы сигнал о присутствии несуществующих препятствий. Поэтому система BFT обеспечивает максимальный уровень безопасности оборудования и его отличное функционирование вне зависимости от погодных условий, температуры или степени механического износа.
U-Security is a new technology from BFT which, in addition to incorporating a new encrypted rolling code transmission, also incorporates the functionalities of the Er-Ready system and introduces a new procedure for programming BFT remote controls by scanning a QR code. The new rolling code system has an encryption key which masks the code and prevents the BFT remote controls from being cloned by third-party models. All products which have this technology integrate the coding system to directly clone remote controls (Er-Ready) and are therefore all REPLAY. In addition, with U-Security it is also possible to add remote controls to a BFT receiver and program them using the QR code which is printed on the cover of each Mitto C, using the dedicated app.
Список изделий
Дополнительные принадлежности
EBT
P111822
BBT BAT CBOX FLAT
P125053
Emergency battery kit for FLAT series panels, complete with dedicated box, wiring and power supply card. Version for external installation,...